Walden's Greenergy Solar, LLC - Generating Renewable Energy

When the current prototype tracker control is converted from electric-electronic to a full-fledge electronic control, it will be second to none. The control will be used primarily for all ‘solar tracking’ projects. Additionally, it will be available to all solar enthusiasts worldwide. It can be a single axis tracker control or a dual axis tracker control.

The tracker control will follow the sun for maximum output efficiency for photovoltaic cells and for the gathering of the sun’s heat and light for their respective applications. Precise tracking and keeping the sunrays parallel allows for the interior lighting of buildings. Lighting the interior of buildings with one beam of sunlight will drastically reduce electric bills. It can also light building interiors where there is an absence of electricity with the application of batteries. The heating of the interior of a building straightaway is also possible. 

The world is in great need for renewable energy; electricity is expensive and can be renewed with Solar Panels. The description of this present project is to take a solid state plug-and-play electronic control system to market and use it to prove out many different projects in renewable energy. The control system is a Dual Axis Solar Control System which is used to control solar platforms of various sizes and forms, and keep them continuously facing the sun. The electronic control PCB includes a companion mounting box with an assortment of various length extension cords. The conical shaped solar platforms are unique. The different platform sizes are dependent on the various applications, i.e. lighting, heating, or generating electricity. There are no limitations on sizes and will be smaller for lighting, to extremely large for generating electricity with solar cell modules. Our platform Design is unique, as compared to what exists in the world today. They’re conical shaped solar platforms. In lieu of a flat design, we can and prefer to use a conical shape that is staggered and stacked in the form of bleachers. This allows for the air to pass through the platform and reduce the resistance to flow. 

The unique collector system is conical in shape. For solar, the dual axis control will keep the solar platform facing the sun maximize the output of the solar cell modules. The sunrays can be concentrated and kept parallel and made perpendicular to earth. The cone shape also allows for harvesting of the wind, and water energies. The cone shape allows for the generation of “fluid force” utilizing air and/or water, with: streams; rivers; waves; tidal, both in and out, using squirrel cage blower wheels, fan blades, etc., and generators. The fluids flowing through the conical shape cause the increase in pressure necessary to drive the blowers/fans etc., driving the electric generators. With front coated conical mirrors, the sunlight can be concentrated and kept perpendicular to earth, and put to good use for many different purposes.

The main good use for light is to illuminate the interior of  space with one light beam; primarily with 1 sunbeam and secondarily with an incandescent spotlight beam when the sun is not available. This is accomplished by circulating a single beam of light at a high rate of speed.

Another needed task is to manufacture a high speed and well balanced rotating mirror assembly.

Intellectual Merit

The description of this present project is to take a solid state plug-and-play electronic control system to market and use it to prove out many different projects in renewable energy.

The control system is a Dual Axis Solar Control System which is used to control solar platforms of various sizes and forms, and keep them continuously facing the sun. The electronic control PCB includes a companion mounting box with an assortment of various length extension cords.

Also included are several sensor assemblies consisting of various sensors and housings. An electronic engineering firm has been contacted and is working with this company to bring the solar control system market. All the components of the entire system can be resized within the realm of practicality. The solar platform is conical in shape, and stacked and staggard like bleachers to allow the wind to pass through to resist wind drag. The cone shape also allows for the harvesting of the wind, and water energies. The cone shape allows for the generation of  kinetic - “fluid force” utilizing air and/or water, with: streams; rivers; waves; tidal, both in and out, using squirrel cage blower wheels, fan blades, etc., and generators. The fluids flowing through the conical shape cause the increase in pressure necessary to drive the blowers/fans etc., driving the electric generators.

Renewable Energy is the wave of the future and is highly necessary to ward off Global Warming. The project is to build and install solar platforms; document the outputs of the solar arrays.

Broader Impacts

The main intent of this project is to make my patented invention available to everyone for their own beneficial use and contribute to the achievement of societal and relevant outcomes. Also included, but are not limited to: full participation of women, persons with disabilities, and underrepresented minorities in science, technology, engineering, and mathematics (STEM).

Many products can be derived from this invention; so many the lists can be endless. The many products can be of any size desirable and in many forms and shapes. This applies to both solar, and wind and water. Some of the products include solar ovens, water heaters and boilers, solar platforms and electricity generators from wind and water devices.

Electricity can be generated, used, and stored in batteries. Heat can also be generated, used and stored, both in fluids and/or a pile of rocks; it can also be stored underground.